Advancing Regulatory Science through Integrative Engineering with COMSOL Multiphysics® Software Modeling
G. Zhang 
 Department of Bioengineering, Institute for Biological Interfaces of Engineering, Clemson University, Clemson, SC, USA
The US Food and Drug Administration (FDA) faces significant challenges in its regulatory approval processes due to a lack of relevant science, and many practices are limited by laws enacted in the previous century . Therefore, in recent years, the FDA has identified the need for advancements in regulatory science and innovation. In a broader sense, advancing regulatory science is not just ...
P. Schmitz, A. Cockx, S. Geoffroy, and J. Gunther
Biochemical Engineering Dpt., Université de Toulouse, Toulouse, France
Chemical Engineering Dpt., Université de Toulouse, Toulouse, France
Mechanical Engineering Dpt., Université de Toulouse, Toulouse, France
An undergraduate course is developed to initiate future engineers to multiphysics numerical simulation by approaching concrete cases in various fields such as: heat transfers, fluid flow, mechanics, chemistry and electrostatics. The so called “Virtual Experiments” course consists of four projects given successively to students. Each project lasts about ten hours. The major notions related to ...
A. Helfrich-Schkarbanenko, M. Mitschele, S. Ritterbusch, and V. Heuveline
Engineering Mathematics and Computing Lab (EMCL), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
Institute for Analysis, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
We consider a 3D boundary value problem arising in electrostatics. The potential is stimulated by current sources placed on a cross-section S of the domain. In many applications it is sufficient to know the potential in S. So, one is interested in an appropriate 2D model taking into account that the solution depends on the dimension of the domain. The idea is to find a corresponding 2D ...
T. Slawig, and U. Prüfert
Christian-Albrechts-Universität Kiel, Kiel, Germany
TU Bergakademie Freiberg, Freiberg, Germany
Use of COMSOL Multiphysics equation-based model capability to solve optimization and control problems. Solution of time-dependent problems with space-time finite elements. Solution of constraint optimization problems. Mathematical back-up for equation-based optimization.
A. K. Palit ,
 ZF-Lemförder Electronic GmbH, ZF-Friedrichshafen AG. Group, Friedrichshafen, Germany
The design of a right contour/structure of the NFC-antenna is presented. The NFC-reader-antenna is applied later to communicate with the NFC-tag (transponder) of a smart phone placed in the phone box of the car. The NFC-reader-antenna with selected contour is printed directly on the PCB and the antenna-PCB is placed under the phone box at the center console. The designed antenna must fulfill ...
COMSOL Multiphysics Models for Teaching Chemical Engineering Fundamentals: Absorption Column Models and Illustration of the Two-Film Theory of Mass Transfer
Chemical Engineering Department, Worcester Polytechnic Institute, Worcester, MA, USA
COMSOL® models have been developed for teaching gas absorption fundamentals. Model results are compared to environmentally significant experimental results for removing CO2 and SO2 from air using water as solvent. For concentrated gas mixtures, the models are shown to be equivalent to but easier to use than the traditional graphical integration method and to a solution method developed with ...
I. Neitzel, U. Prüfert, and T. Slawig
DFG priority program SPP 1253, Technische Universität Berlin, Berlin, Germany
DFG research center Matheon, Technische Universität Berlin, Germany
DFG Cluster of Excellence The Future Ocean, DFG priority progam SPP 1253, Christian-Albrechts-Universität zu Kiel, Kiel, Germany
We use COMSOL Multiphysics to solve time-dependent optimal control problems for partial differential equations whose optimality conditions can be formulated as a PDE. For a class of linear-quadratic model problems we summarize known analytic results on existence of solutions and first order optimality conditions that exhibit the typical feature of time-dependent control problems, namely the fact ...
Atomic Energy of Canada Limited, Mississauga, Ontario, Canada
RFSP-IST (Reactor Fueling Simulation Program) is a computer code used for the full-core neutronics design and analysis of CANDU® reactors. RFSP-IST calculates the static flux and power distributions in the core by solving the neutron diffusion equation in two energy groups. For validation purposes, results from RFSP-IST are often compared with those from other codes. This paper documents the ...
A. Weddemann, D. Kappe, and A. Hütten
Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge MA, USA
Department of Physics, Thin Films and Physics of Nanostructures, Bielefeld University, Bielefeld, Germany
In principal, the calculation of the magnetic state inside a magnetic object requires the evaluation of the field in the entire unbounded space. With finite element methods restricted to finite domains, commonly auxiliary domains are employed which result in a non-physical cut-off. Not only that these additional domains result in an increased number of degrees of freedom which are strictly ...
3D COMSOL Multiphysics® Model of a Plate Heat Exchanger to Support a Laboratory Teaching Environment - new
N. Medeiros, W. Clark
Worcester Polytechnic Institute, Worcester, MA, USA
Chemical engineering students and practitioners need an understanding of fluid flow and heat transfer inside heat exchangers. Because the flow within plate heat exchangers is difficult to visualize, we developed COMSOL Multiphysics® simulations of plate heat exchangers for students to study alongside a physical heat exchanger in a laboratory setting. Simulative experiments allow students to ...