Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Cloud Computations for Acoustics with Coupled Physics - new

A. Daneryd[1], D. Ericsson[2]
[1]ABB Corporate Research, Västerås, Sweden
[2]COMSOL AB, Stockholm, Sweden

For certain classes of scientific and technical computations the cloud may offer easily accessible, scalable, and affordable gigantic computing power. A power that for these classes may lead to a step change in model and analysis complexity compared to what is feasible with dedicated clusters and similar networked solutions. Acoustics with or without interaction with coupled physics fields ...

3D-FEA of the Relationship between the Occiput and Sphenoid in the Osteopathic Paradigm - new

Y. Chiesa[1]
[1]Istituto Superiore di Osteopatia, Milan, Italy

The concept of cranial Primary Respiratory Mechanism (MRP) is used by osteopathic practitioners to explain the perceptual characteristics arising from the clinical palpation approach of the human skull. The theoretical apparatus and the same MRP existence is always element of controversy among the scientific community. The results arising from this study highlight the intrinsic capability of ...

Near-Wall Dynamics of Microbubbles in an Acoustical Trap - new

L. Wright[1], G. Memoli[1], P. Jones[2], E. Stride[3]
[1]National Physical Laboratory, Teddington, UK
[2]University College London, London, UK
[3]University of Oxford, Oxford, UK

Understanding the interactions between microbubbles and surfaces is key to the successful deployment of microbubbles in a range of applications. Two important examples are their use as a drug delivery mechanism, and their potential use of acoustically-driven bubbles as microscale sensors. Drug delivery with bubbles involves sonication at high frequency close to a boundary, and sensing with ...

稳态磁场对激光熔凝熔池的抑制作用研究 - new

王梁[1], 胡勇[1]

激光熔凝通常被作为材料表面的最终处理工艺,然而激光熔凝处理后,材料表面容易出现高低起伏的波纹,降低了其表面质量。因此,为了在激光熔凝处理后获得平整的表面,同时降低后续机加工所需的成本和时间,本文提出了利用稳态磁场抑制激光所致熔池运动的方法。以固液相变统一模型为基础,建立了考虑热传导、流体运动、相变及电磁场作用的多物理场耦合2D瞬态仿真模型,将洛仑兹力以体积力形式添加到动量方程源项中,并利用移动网格(ALE)的方法在模型中计算了熔池表面的运动形态。通过该模型计算了由稳态磁场引起的熔池中的洛伦兹力与由表面张力引起的Marangoni对流影响熔池表面形貌的相互影响过程以及不同磁场强度下熔池速度场、温度场分布情况。同时,包含激光功率、扫描速度、表面张力温度系数等相关材料属性和工艺参数对熔池表面形貌的影响也进行了仿真分析。通过激光熔凝后试样表面的实际高度扫面图像结果以及温度对比图 ...

Realistic Human Head Model for Simulating the Effect of Electrical Stimulation

S. Swargam [1], S. Devasahayam [2], S. Wankhar [2],
[1] Indian Institute of Technology Madras, Chennai, Tamil Nadu, India
[2] Christian Medical College, Vellore, Tamil Nadu, India

Using a Realistic Human Head model to simulate the effect of electrical stimulation can be useful in understanding field distribution in the brain and therefore, the actual point of stimulation before doing it on human subject. With the help of this model, parameters like the stimulus strength as well as electrode placement and its effect can be tested much more easily while targeting a ...

Numerical Analysis of the Flow Structure in the Continuous Casting Two-strand Tundish

M. Warzecha [1], J. Jowsa [1], A. M. Hutny [1], P. Warzecha [1], T. Merder [2]
[1] Czestochowa University of Technology, Czestochowa, Poland
[2] Silesian University of Technology, Katowice, Poland

Calculations were carried out for the water model of the investigated tundish, represented on a scale 1:3. Numerical calculations enable to estimate the fluid flow velocities, pahtlines and other parameters. Calculations were done for two different grids. Based on the results, the flow structure in the investigated tundish was obtained.

Multi-Dimensional Adsorption Model of CO2/H2O Sorbent Bed

C. Gomez [1], R. F. Coker [1], J. Knox [1], G. Schunk [1]
[1] NASA MSFC, Huntsville, AL, USA

The primary interest of the VC (Vacuum Characterization) test is to experimentally characterize the adsorption and vacuum desorption of CO2 and water vapor of a pelletized sorbent bed in a large diameter column. The VC test article is shown in Figures 1 and 2. The aluminum canister is 3” in diameter and approximately 8” long allowing for variable sorbent bed loads from 1” to 6” in length. A ...

Molecular Hydrogen Tracking in an Electrolytic Polishing Process

L. M. A. Ferreira [1],
[1] CERN, Geneva, Switzerland

In a water based electrolytic polishing process, the formation of molecular hydrogen at the cathode is unavoidable and it can contribute to the formation of surface defects at the anode side. This paper presents the work to model and simulate the molecular hydrogen flow inside radio frequency cavity geometries and compares it with the presence, type and relative position of certain defects in ...

Advancing Regulatory Science through Integrative Engineering with COMSOL Multiphysics® Software Modeling

G. Zhang [1]
[1] Department of Bioengineering, Institute for Biological Interfaces of Engineering, Clemson University, Clemson, SC, USA

The US Food and Drug Administration (FDA) faces significant challenges in its regulatory approval processes due to a lack of relevant science, and many practices are limited by laws enacted in the previous century [1]. Therefore, in recent years, the FDA has identified the need for advancements in regulatory science and innovation. In a broader sense, advancing regulatory science is not just ...

Modelling of Seismoelectric Effects

B. Kröger[1], U. Yaramanci[2], and A. Kemna[1]
[1]1 University of Bonn
[2]GGA Hannover

We present the results of full-waveform time-dependent finite-element modelling of coupled seismoelectromagnetic wave propagation in fluid-saturated porous media. To describe the seismoelectric response of the system a new set of equations is developed which couple the poroelasticity theory and Maxwell’s equations via flux/force transport equations in a thermodynamical sense. The coupling ...