Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Coupled Electromagnetic - Dynamic FEM Simulation of A High Frequency MEMS Energy Harvester

E. Topal
Middle East Technical University

In this study, a detailed finite element model coupling the motion dynamics and electromagnetics of a diaphragm based MEMS vibration energy harvester is presented. The energy harvester converts low frequency vibrations to high frequency response by magnetic actuation of a diaphragm carrying coils. AC/DC, Solid Mechanics and Moving Mesh (ALE) modules are coupled together in one 3-D model to ...

Capacitive Accelerometer Characteristics Study

B. S. Kavitha[1], S. B. Rudraswamy[1], C. R. Venugopal[1]
[1]SJCE, Mysore, Karnataka, India

This paper will describe the dependence of capacitive accelerometer characteristics on the accelerometers physical dimension and its material properties. The sense element of the accelerometer is designed on the basis of a commercially available torsion based accelerometer technology. The sense element consists of an asymmetrically shaped flat plate of metal supported above a substrate surface ...

Tunable MEMS Capacitor for mm and μm Wave Generation

Arpita Das[1], Amrita Nandy[1], Sakuntala Mahapatra[1], Sk. Mohammed Ali[1], Minu samantary[1]
[1]National MEMS design centre ,Department of Electronics and Telecommunication, Trident Academy of Technology, Biju Pattnaik University of Technology , India

This paper demonstrates the design of a tunable MEMS capacitor with two plates (one movable and one fixed). The response time obtained is 5μs. The tunable capacitor plays an important role in RF circuits. We focus on a tunable capacitor simulated using COMSOL Multiphysics®. In an electrostatically tunable parallel plate capacitor, you can modify the distance between the two plates when the ...

Multiple-Mode Polymeric-Silicon Dual-Channel Gas Sensors

K. Liang [1], A. Dodabalapur [1], D. Sharma [1],
[1] Microelectronics Research Center, University of Texas, Austin, TX, USA

An organic-inorganic dual-channel sensor makes a strong chemical gas sensor because this device design combines the high chemical sensitivities and selectivity of organic semiconductors [1-4] with the superior electrical performance and convenient integration of silicon semiconductors. As shown in the device schematic in Figure 1, the organic channel is the chemically-active material and is ...

Multiphysics Modeling of Nanoparticle Detection - Current Status and Collaboration Sought

D. Krizaj[1], I. Iskra[2], Z. Topcagic[1], and M. Remskar[2]
[1]University of Ljubljana, Faculty of Electrical Engineering, Ljubljana, Slovenia
[2]Institut Jozef Stefan, Ljubljana, Slovenia

We are developing nanoparticle detector for airborn particles. The detection principle is based on condensation of nanoparticles forming micron sized water droplets and detection of the droplets by a capacitive type nanodetector. We have successfully performed some experimental evaluations of the detection principle and are in the stage of optimization of several parts of the system. As ...

Numerical Modeling of a MEMS Sensor with Planar Coil for Magnetic Flux Density Measurements

J. Golebiowski[1], S. Milcarz[1]
[1] Department of Semiconductor and Optoelectronics Devices, Technical University of Lodz, Lodz, Poland

The silicon cantilever with the planar coil was applied to the magnetic flux density measurements. The influence of shape and dimensions of planar coil on magnetic energy density was described. In cause of magnetic anisotropy of analyzed silicon structure FEM method and couple field method was applied in simulation. The Lorentz force based sensors owing to their potentially simpler ...

Finite Element Model of Surface Acoustic Wave Scattering with High-Aspect-Ratio Irregularities

S. Iuliia [1], Y. Sergey [1], K. Sergey [1], P. Alexey [1],
[1] Saratov State University, Saratov, Russia

The design of surface acoustic wave (SAW) devices needs the accurate study of the scattering fields, arising from the interaction of SAW with periodic irregularities placed on a surface of crystal to form interdigital transducers or reflective structures (RS). To solve this problem, the finite element methods are very perspective, because they allow to take into account the actual geometry of ...

Designing the Actuator for the Next-Generation Astronomical Deformable Mirrors: a Multidisciplinary and Multiphysics Approach

C. Del Vecchio[1], R. Biasi[2] , D. Gallieni[3], and A. Riccardi[1]

[1]INAF-OAA, Fierenze, Italy
[2]Microgate Srl, Bolzano, Italy
[3]ADS International Srl, Valmadrera, Italy

The actuation system of the deformable mirror is one of the crucial components of an Adaptive Optics unit. One possible implementation comprehends a linear force motor and a capacitive sensor providing the feedback measure signal. Choosing a magnetic circuit that makes optimum use of the magnetic force delivered by a current and properly arranging the electrostatic geometry allows to obtain very ...

Droplet Generation by Means of a Two-Fluid Probe

B.P. Cahill[1], M. Quade[1], G. Gastrock[1], K. Lemke[1], J. Metze[1], and D. Beckmann[1]

[1]Institut für Bioprozess und Analysenmesstechnik e.V., Rosenhof, Heilbad Heiligenstadt, Germany

This paper presents a simulation of the operation of a new type of droplet generation probe. This probe, consisting of two concentrically-arranged tubings, is immersed in a beaker of cell medium so that oil is pumped through the outer tubing at a pumping speed less than fluid is drawn into the inner tubing. In this way, droplets of cell medium are entrained into the outlet tubing forming a ...

FEM Based Estimation of Biological Interaction Using a Cantilever Array Sensor

S. Logeshkumar, L. Lavanya, G. Anju, and M. Alagappan
PSG College of Technology
Tamil Nadu, India

In the model silicon nanorods are designed as cantilever array and coated with thin film of aluminum or aluminum nitride, to be characterized, thus, adding a detectable mass and altering the cantilever resistance to bending. The simulated results show that when films of different thickness are placed on the cantilever, there is a corresponding change in the resonant frequency and the ...