Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

COMSOL Multiphysics® Simulation of Ultrasonic Energy in Cleaning Tanks - new

L. Zhong[1]
[1]Seagate Technology, Bloomington, MN, USA

Ultrasonic based cleaning process, widely used in various industries, mainly utilizes the cavitation effect to achieve contamination removal. For a given set of ultrasonic tank parameters, such as cleaning fluid, temperature, frequency etc, the cavitation effect is largely impacted by the amount of ultrasonic energy. Determining optimal ultrasonic energy level often becomes the key to the ...

Utilization of COMSOL Multiphysics® Java API for the Integration of Composite Material Properties Through a Customized User Interface - new

R. Malav[1]
[1]Indian Institute of Technology Madras, Chennai, Tamil Nadu, India

Introduction: Usage of Composite Materials properties is rapidly gaining acceptance in various industries such as aircraft manufacturing, automotive, healthcare, etc. Its main strengths are light weight material, great strength and durability, strength related to weight, corrosion resistance and design flexibility. In the process of modeling and simulation, many a time a user wants to use ...

Computational Acoustic Attenuation Performance of Helicoidal Resonators

W. Lapka
Poznan University of Technology
Poznan, Poland

This paper concerns the problem of obtaining proper acoustic attenuation performance through computations. COMSOL was used to solve acoustics systems with helicoidal resonators in the frequency domain. Based on the studies of insertion and transmission loss of helicoidal resonators, a high consistency between the results obtained by numerical calculations with experimental measurements was ...

Optimization of Acoustic Silencer for the Screw Compressor System - new

M. Swamy[1], L. J. van Lier[1], J. Smeulers[1]
[1]TNO, Delft, The Netherlands

In one of the screw compressor system, designed silencer was not optimal. A great challenge was the large variation in operating conditions, especially the variation of the molecular weight of the gas. There was need to optimize the silencer. This paper describes the acoustic modelling tools to optimize the acoustic performance of the silencer. Optimization steps carried out are based on the ...

Simulating Acoustic Combustion Chamber Eigenmodes to Facilitate Combustion Stability in Rocket Engines

R. Kaess [1], J. Braun [1],
[1] Airbus Safran Launchers, Ottobrunn, Germany

Airbus Safran Launchers is the market leader in Space Launch services. Rocket engines are among the most powerful machines that exist. The core of the rocket engine is the combustion chamber where in the case of liquid propellant rocket engines, fuel and oxidizer are injected, mixed and burnt and where, consequently, the energy release takes place. The hot combustion gases are accelerated in a ...

Phase Decomposition for Loudspeaker Analysis

R. Christensen [1],
[1] GN ReSound A/S, Copenhagen, Denmark

The vibration of an electrodynamic loudspeaker driver causes a resulting sound pressure. For simple pistonic vibration, there is a simple relationship between the vibration and the sound pressure. For complex vibration patterns, however, different parts of the vibrating surface contribute differently to the sound pressure, depending on the position in which the sound pressure is evaluated. A ...

Developing Solutions to Tonal Noise from Wind Turbines Using COMSOL Multiphysics® Software

J. M. Stauber [1], B. A. Marmo [1],
[1] Xi Engineering Ltd, Edinburgh, United Kingdom

Tonal noise from wind turbines can have effects on neighboring residences and its emission can result in strong regulatory penalties that can include the closure of wind farms. The authors present a model of a new broadband damping approach where containers filled with EniDamp™, an Advance Particle Damping (APD) material. The containers, so-called APD pods, are magnetically fixed to wind ...

Virtual Acoustic Prototyping – Practical Applications for Loudspeaker Development

A. Salvatti
JBL Professional, Northridge, CA, USA

The author presents an overview of methods to build virtual prototypes of both horns and loudspeaker drivers which allows a significant reduction in the number of physical prototypes, as well as reduced development time. This paper will present some of the practical results from work the author has performed in the course of designing both transducers and horns using COMSOL Evolution of the ...

Numerical Simulation of Phonon Dispersion Relations for Phononic Crystals

G. Zhu[1], E.M. Dede[1]
[1]Toyota Research Institute of North America, Ann Arbor, MI, USA

In previous work, a two-dimensional (2D) model was carried out to simulate the phononic band structure of a phononic crystal with square lattice structure, but this model did not account for the out-of-plane phonon dispersions [1]. In fact, for 2D films used for coating materials, it is more interesting to understand their cross-plane properties. In this work, the phonon dispersion relation of ...

Infrasound Assessment of the Roller Compacted Concrete Dam: Case Study of the Portugues Dam in Ponce, PR

H. Diaz-Alvarez [1], V. P. Chiarito [1], S. McComas [1], M. H. McKenna [1],
[1] U.S. Army Engineer Research and Development Center, Vicksburg, MS, USA

The U.S. Army Corps of Engineers is currently investigating the use of infrasound sensors to monitor the health of structures of interest. Infrasound is low-frequency (2-20 Hz) acoustic energy and is capable of propagating many kilometers from the source structure. Large infrastructure, such as dams, bridges, and buildings emit such signals at their natural or driven frequencies of vibration, ...