The Application Gallery features COMSOL Multiphysics® tutorial and demo app files pertinent to the electrical, structural, acoustics, fluid, heat, and chemical disciplines. You can use these examples as a starting point for your own simulation work by downloading the tutorial model or demo app file and its accompanying instructions.

Search for tutorials and apps relevant to your area of expertise via the Quick Search feature. To download the MPH-files, log in or create a COMSOL Access account that is associated with a valid COMSOL license. Note that many of the examples featured here can also be accessed via the Application Libraries that are built into the COMSOL Multiphysics® software and available from the File menu.

Finding Kinetic Arrhenius Parameters Using Parameter Estimation

This example shows how to use the Parameter Estimation and Experiment features in the Reaction Engineering interface for optimization with multiple experimental data input files. The application finds the Arrhenius parameters of a first order reaction where Benzene diazonium chloride decomposes to benzene chloride and nitrogen at 313, 319, 323, 328, and 333 K.

Fine Chemical Production in a Plate Reactor

Plate reactors running under continuous conditions have emerged as candidates to replace batch reactors, primarily in fine chemicals and pharmaceuticals production. One of the advantages of the plate reactor design is that it allows for efficient temperature control of the reacting fluid. For instance, this means that the heat released from strongly exothermic reactions can be readily ...

Ibuprofen Synthesis

Kinetic analysis of catalytic reactions is essential for understanding rate behavior as well as the reaction mechanism. Developing knowledge of intrinsic reaction kinetics and of rate equations is central to reaction engineering studies aimed at improving reactor design. This model illustrates the reaction kinetics of a complex chemistry occurring in a perfectly stirred tank reactor. The ...

Chemical Reactions and Soot Build-Up in a Diesel Filter

In this tutorial, a filter system for a diesel engine is modeled, including where a soot layer builds up and is oxidized. The build-up of the layer is held in check by both catalytic and non-catalytic reactions, where carbon is oxidized to carbon monoxide and carbon dioxide, which in turn passes through the membrane. A filter system's efficiency and durability is closely related to the manner ...

Isoelectric Separation

This example applies the *Electrophoretic Transport* and *Laminar Flow* interfaces to model isoelectric separation in a free-flow electrophoresis device. A stream containing six different ionic species is shown to be divided into pure component streams by means of migrative transport in an electric field. Free-flow electrophoresis can separate macromolecules such as proteins, based on their ...

Zone Electrophoresis

Zone electrophoresis (ZE) is an electrophoretic separation technique typically used for analyzing proteins, nucleic acids, and biopolymers. During the process, different species in a sample are transported in a continuous electrolyte buffer system, subject to a potential gradient. Due to differences in the mobilities, the species in the samples will eventually separate into different, well ...

HI Batch Reactor

This tutorial example illustrates the versatility of the *Reaction Engineering* interface. The hydrogen iodine reaction is modeled in a batch reactor with constant volume. Both isothermal and non-isothermal conditions are modeled.

Competing Reactions

Tutorial model of a set of two competing reactions. The model demonstrates: - A good modeling strategy for reaction engineering - How to go from chemical equations to space-dependent models of reacting flow with a minimum of work.

Startup of a Continuous Stirred Tank Reactor

The hydrolysis of propylene oxide into propylene glycol is an important chemical process with 400,000 metric tons produced worldwide each year. Propylene glycol finds wide application as a moisturizer in foods, pharmaceuticals, and cosmetics. In this example, the startup phase of a continuous stirred tank reactor (CSTR) used to produce propylene glycol is investigated. The non-isothermal ...

Tank Series with Feedback Control

This example illustrates how to set up and solve a tank-in-series model in 0D using the Reaction Engineering interface. The model treats a series of three consecutive tank reactors. A feedback loop continuously adjusts the inlet concentration of the first tank to keep the concentration at the outlet of the last reactor close to a set level.