Solar Panel in Periodic Flow
Application ID: 12205
The coupling of fluid flow and structural mechanics is a challenging problem for several reasons. The fluid flow problem usually requires a specific kind of mesh that is not appropriate for structural mechanics. Additionally, one may want to include geometric features in the structural model that are not significant for the fluid flow model.
This model computes the structural stresses and deflections on a solar panel due to a turbulent wind load. Different geometries and meshes are used for the fluid and structural problems. The free stream air flow is 15 m/s, and the solar panel is in a regularly spaced array, implying periodic flow boundary conditions.
This model is included as an example in the following products:CFD Module
however additional products may be needed to reproduce it. This example may be created and run using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.