Porous Reactor with Injection Needle
Application ID: 25
This application treats the flow field and species distribution in an experimental reactor for studies of heterogeneous catalysis. The model exemplifies the coupling of free and porous media flow in fixed bed reactors.
The reactor consists of a tubular structure with an injection tube that has its main axis perpendicular to the axis of the reactor. The incoming species in the main and injection tubes reacts in a fixed porous catalyst bed. The model couples the free fluid and porous media flow through the Navier-Stokes equations and Brinkman’s extension of Darcy’s law. The mass transport for the three species is modeled with the convection-diffusion equation.
This model is included as an example in the following products:Chemical Reaction Engineering Module
however additional products may be needed to reproduce it. This example may be created and run using components from the following product combinations:
- COMSOL Multiphysics® and
- either the Batteries & Fuel Cells Module, CFD Module, or Chemical Reaction Engineering Module
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.