Inkjet Nozzle - Level Set Method
Application ID: 1445
Although initially invented to be used in printers, inkjets have been adopted for other application areas, such as within the life sciences and microelectronics. Simulations can be useful to improve the understanding of the fluid flow and to predict the optimal design of an inkjet for a specific application.
The purpose of this application is to adapt the shape and operation of an inkjet nozzle for a desired droplet size, which depends on the contact angle, surface tension, viscosity, and density of the injected liquid. The results also reveal whether the injected volume breaks up into several droplets before merging into a final droplet at the substrate.
The fluid flow is modeled by the incompressible Navier-Stokes equations together with surface tension, using the level set method to track the fluid interface.
This application is included as an example in the following products:CFD Module Microfluidics Module
however additional products may be needed to reproduce it. This example may be created and run using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.