May 17, 2018 Tustin, California8:30 AM - 4:00 PM

Back to Events Calendar

You are invited to join us at COMSOL Day Orange County for a day of minicourses, talks by invited speakers, and the opportunity to exchange ideas with other simulation specialists in the COMSOL community.

View the schedule for minicourse topics and presentation details. Register for free today.

Schedule

8:30am
Registration
9:00am

This introductory demonstration will show you the fundamental workflow of the COMSOL Multiphysics® modeling environment. We will cover all of the key modeling steps, including creating geometries, setting up physics, meshing, solving, and postprocessing. We will also highlight new features in COMSOL Multiphysics® version 5.3a.

9:45am
Coffee Break
10:00am
Invited Speakers

COMSOL® Modeling of the DIII-D Tokamak Systems

The DIII-D tokamak is a plasma experimental device that employs magnetic fields to achieve nuclear fusion. A complex set of coils with up to 140 kA of current are used to create, shape, and confine the plasma. Plasma currents of 2.5 MA with magnetic fields up to 2.1 T are produced and maintained for up to 10 s.

Two external heating systems are required to heat the plasma to fusion temperatures. 20 MW of neutral beams are used to inject extremely fast neutral particles, and 4 MW of microwave power are used to generate RF waves for plasma heating and control. While the magnetic field and coil currents are typically static or slowly varying, the plasma current can collapse in a few milliseconds ("disruption") and this transient can induce forces and torques on attached structures. These effects need to be modeled and understood in order to design new systems and to calculate their operational regime.

The COMSOL Multiphysics® software with its user-friendly interface has been used to model many coils and RF antenna configurations. Its visualization capability has been valuable for solving problems and optimizing new designs. In this presentation, the magnetic field configuration in the DIII-D tokamak and its neutral beam system will be presented, and calculations of the induced currents and electromagnetic loads due to the fast plasma current disruption will be described. RF characteristics of a new antenna being developed as a plasma heating source will also be presented.

Acoustic Modeling Using COMSOL Multiphysics®

The COMSOL Multiphysics® software and add-on Acoustics Module provides powerful numerical tools for modeling and studying acoustic systems and predict factors like acoustic and noise reduction performance. An introduction to acoustic and vibration analyses using COMSOL Multiphysics® and the Acoustics Module will be presented. Two simple examples will be featured for numerical modeling purposes and will be discussed.

10:45am
Coffee Break
11:00am

Learn how to convert a model into a custom app using the Application Builder, which is included in the COMSOL Multiphysics® software. You can upload your apps to a COMSOL Server™ installation to access and run the apps from anywhere within your organization.

11:45am
Break for Lunch
1:15pm
Parallel Minicourses
Microfluidics and Chemical Reaction Engineering

Learn how to model and simulate fluid dynamics and chemical reactions in a microscale device using the Microfluidics Module and Chemical Reaction Engineering Module within the COMSOL® software environment.

Solvers and Meshing

Explore the meshing techniques that are available in the COMSOL Multiphysics® software and learn about different solver and study types.

2:00pm
Coffee Break
2:15pm
Parallel Minicourses
Optimization Minicourse

Learn to use gradient-based optimization techniques and constraint equations to define and solve problems in shape, parameter, and topology optimization, as well as inverse modeling. The techniques shown are applicable for almost all types of models.

Low-Frequency Electromagnetics Minicourse

Explore the capabilities of COMSOL Multiphysics® for electromagnetics in the static and low-frequency regime with a focus on the AC/DC Module.

3:00pm
Coffee Break
3:15pm
Parallel Minicourses
Acoustics and Piezoelectricity

Learn how to model and simulate acoustics and piezoelectric problems using the Acoustics Module, Structural Mechanics Module, and MEMS Module within the COMSOL® software environment.

Bioheating

Learn how to model and simulate electromagnetic heating problems in biomaterials using the Heat Transfer Module and RF Module within the COMSOL® software environment.

COMSOL Day Details

Location

Fairfield Inn & Suites by Marriott Tustin Orange County
15011 Newport Avenue
Tustin, California 92780
Directions

COMSOL Speakers

Leo Hwang
COMSOL, Inc.
Leo Hwang has been working as an applications and technical sales engineer in COMSOL's Los Angeles office since 2005. He received his MSc in mechanical engineering at the University of California, Los Angeles (UCLA).
Mina Sierou
COMSOL, Inc.
Mina Sierou joined COMSOL's Los Angeles office in 2004. Prior to joining COMSOL, she received her PhD in chemical engineering from Caltech in 2001 and spent a couple of years in Cambridge, England doing postdoctoral research.
Andy Cai
COMSOL, Inc.
Andy Cai joined COMSOL's Los Angeles office in 2015. Previously, he received his PhD in geophysics from Yale in 2014 and spent a year at the University of Maryland, College Park for postdoctoral work.
Ping Chu
COMSOL, Inc.
Ping Chu is an applications engineer specializing in electromagnetics and optics. Prior to joining COMSOL in 2012, Ping received her PhD in condensed matter physics from the University of California, Irvine, investigating the plasmonic and ferromagnetic properties of metallic nanostructures.

Invited Speakers

Humberto Torreblanca
General Atomics, DIII-D National Fusion Facility
Dr. Humberto Torreblanca is a scientist with a broad experience in plasma science and technology as well as an avid promoter of STEM education and science outreach activities. He received his PhD in electrical engineering from the University of California, Los Angeles, where he worked on developing a novel plasma source based on helicon waves. After graduation, he worked at Intel Corporation engineering plasma etch processes for the semiconductor industry and later worked at Tribogenics designing a novel X-ray source based on triboelectric phenomena. Dr. Torreblanca presently works at the DIII-D National Fusion Facility, where he is part of the Operations group. He is currently working on a new RF antenna that will be used for plasma heating and current drive on the DIII-D tokamak. He has used the COMSOL® software to study antenna RF coupling, coils' magnetic configuration, and the calculation of electromagnetic forces due to plasma disruption events; among other topics. He has initiated an internship program at the DIII-D tokamak and has organized science events in Peru, where he has used COMSOL Multiphysics® to teach the basics of a magnetic confinement fusion reactor to undergraduate students.
Gopal Mathur
Meta Acoustic Technologies, Inc.
Dr. Gopal P. Mathur’s experience and research are in the areas of acoustics, acoustic meta materials, active noise control, structural acoustics, composite structures, aircraft engine liners, signal processing, vibrations and damping, and systems engineering. He received his PhD in mechanical engineering from Purdue University. Currently, he is the founder and president of the engineering consulting company called Meta Acoustic Technologies, Inc. He has worked on consulting projects with Ingersoll Rand, Trane, Honeywell, NASA, AMM Inc., and SMD Corp. He has used the COMSOL Multiphysics® software for a number for years for the numerical modeling of physical systems in the areas of acoustics, vibrations, acoustic meta materials, audio systems, etc.

Register for COMSOL Day Orange County

This event has ended. Visit the event calendar to view upcoming events.