Model Gallery

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

Tonpilz Piezo Transducer

The tonpilz (sound mushroom) piezo transducer is a transducer for relatively low frequency, high power sound emission. The transducer consists of piezoceramic rings stacked between massive ends and pre-stressed by a central bolt. The tail and head mass lower the resonance frequency of the device. In this model the frequency response of the transducer when the bolt is not pre-stressed is ...

Muffler with Perforates

Reflective mufflers are best suited for the low frequency range where only plane waves can propagate in the system, while dissipative mufflers with fibers are efficient in the mid-to-high frequency range. Dissipative mufflers based on flow losses, on the other hand, work also at low frequencies. A typical automotive exhaust system is a hybrid construction consisting of a combination of ...

Acoustics of a Particulate-Filter-Like System

This is the model of the acoustics in a particulate-filter-like system. Real systems, like diesel particulate filters (DPFs), are designed to remove/filter soot (diesel particles) from the exhaust of diesel engine vehicles. The porous medium in such systems are typically structured with long air filled slits/chanels. In this 2D axisymmetric model the filter is approximated with a porous material ...

Focused Ultrasound Induced Heating in Tissue Phantom

This model example shows how to model tissue heating induced by focused ultrasound. First, the stationary acoustic field in the water and the tissue are modeled to obtain the acoustic intensity distribution in the tissue. The absorbed acoustic energy is then calculated and used as the heat source for a Bioheat Transfer physics in the tissue domain in a time-dependent study simulating the ...

Absorptive Muffler

The sound level from a car depends to a great extent of the quality of the muffler. Over the years, researchers in the car industry have struggled to produce mufflers that are efficient from both an acoustic and an environmental perspective. This model describes the pressure wave propagation in a muffler for an internal combustion engine. The model also shows how to analyze both inductive ...

SAW Gas Sensor

A surface acoustic wave (SAW) is an acoustic wave propagating along the surface of a solid material. Its amplitude decays rapidly, often exponentially, through the depth of the material. SAWs are utilized in many kinds of electronic components, including filters, oscillators, and sensors. SAW devices typically apply electrodes to a piezoelectric material to convert an electric signal into a ...

Acoustic-Structure Interaction

Liquid or gas acoustics coupled to structural objects such as membranes, plates or solids are important applications in many engineering fields. This model is a general demonstration of an acoustic fluid phenomenon in 3D that is coupled to a solid object. The walls of the solid object are impacted by the acoustic pressure. The frequency response from the solid is calculated, which is then fed ...

Sedan Interior Acoustics

This is a model of the acoustics inside a sedan, that is inside a typical hard-top family car. The model sets up sources at loudspeaker locations as well as impedance conditions to model soft absorbing surfaces (seats and carpet). The model results in plots of the pressure, sound pressure level, and intensity inside the car. The frequency response at given points inside the cabin are also ...

Loudspeaker Driver

This is a model of a loudspeaker of the dynamic cone driver type, common for low and medium frequencies. The model analysis includes the total electric impedance and the on-axis sound pressure level at a nominal driving voltage, as functions of the frequency. The model starts out with the Small-Signal analysis from the AC/DC Module to compute the driving force and the blocked voice coil ...

Jet Pipe

This example models the radiation of fan noise from the annular duct of a turbofan aeroengine. When the jet stream exits the duct, a vortex sheet appears along the extension of the duct wall due to the surrounding air moving at a lower speed. The near field on both sides of the vortex sheet is calculated. The Aeroacoustics modeling interface in the Acoustics Module describes acoustic waves in a ...

Quick Search

1 - 10 of 49 First | < Previous | Next > | Last