-
Filter by Topic
Most Popular
All Topics
- List all discussions
LinkedIn
Facebook
Twitter
Delicious
Digg
Stumbleupon
More services..."Failed to Export model" solidworks livelink error
|
Thread index | Previous thread | Next thread | Start a new discussion |
RSS feed |
Turn on email notifications |
6 Replies
Last post: February 8, 2012 5:20am UTC
October 21, 2010 11:38pm UTC
"Failed to Export model" solidworks livelink error
Whenever I try to livelink with a solidworks assembly I get the error:
"Failed to export model from solidworks"
I am using Comsol 4.0a and solidworks 2009 SP3.0.
Any ideas what would be causing this problem?
Alex
Reply | Reply with Quote | Send private message | Report Abuse
October 22, 2010 6:58am UTC in response to Alex Trott
Re: "Failed to Export model" solidworks livelink error
Hi
it could be an incompatibility with the versions, it's becoming increasingly difficult these days to keep all interrelated software tools at a coherent version level. With COMSOL I must balance matlab and SolidWorks versions, but matlab I must also balance with several other tools, and Solidworks with our CAM not to say with our clients versions too. It's becomning a nightmare !!
What if we cooled down the fight for the absolute latest feature ?
--
Good luck
Ivar
Reply | Reply with Quote | Send private message | Report Abuse
December 5, 2010 10:42am UTC in response to Ivar Kjelberg
Re: "Failed to Export model" solidworks livelink error
where can I find the compatiblity chart, i.e
version 3.5 works with SW 2009?!
version 4.0 works with SW 2010?!
or something of the sort?
Reply | Reply with Quote | Send private message | Report Abuse
December 5, 2010 10:54am UTC in response to Maayan Honig
Re: "Failed to Export model" solidworks livelink error
Hi
good remark, worth to ask "support" I believe. There are quite some info in the knowledge base KB of COMSOL, try a search with "matlab" as keyword, but I do not know of a summary table of certified compatibility per version.
Have a check in the release notes too, but do not forget the patches and the respective release notes ;)
--
Good luck
Ivar
Reply | Reply with Quote | Send private message | Report Abuse
October 5, 2011 3:37pm UTC in response to Ivar Kjelberg
Re: "Failed to Export model" solidworks livelink error
Any update on this?
I am interested in the same compatibility information for the Solid Works LiveLink..
Reply | Reply with Quote | Send private message | Report Abuse
October 26, 2011 11:21am UTC in response to Christian Mose
Re: "Failed to Export model" solidworks livelink error
Hi Christian,
For COMSOL 4.2 you'll find this information here (for windows):
http://www.comsol.com/products/requirements/windows/
Best regards
Vincent
Reply | Reply with Quote | Send private message | Report Abuse
February 8, 2012 5:20am UTC in response to Vincent Chenal
Re: "Failed to Export model" solidworks livelink error
thanks.
"LiveLink for SolidWorks® is compatible with SolidWorks 2010, 2011, and 2012 (requires COMSOL 4.2a Update 1)."
now i know why it doesnt work with my SolidWorks 2009.
Reply | Reply with Quote | Send private message | Report Abuse
Rules and guidelines
